Congratulations on receiving your Accessport.

You’re one step closer to a properly calibrated vehicle.

At CAMTuning, your vehicle will be calibrated, not just programmed.

How the Remote Tuning Process Works

CAMTuning remote calibration is structured and data-driven. Your vehicle is calibrated based on real logs from your specific setup.

Step 1 – Install & Flash

• Install the Accessport

• Flash the provided CAMTuning map

• Drive and record the required data logs

Step 2 – Submit Logs

After flashing your map, you will email your logs for review.

What happens next depends on the service you selected:

Flash Only

• Your log is reviewed to confirm safe operation.

• Once verified, the process is complete.

Custom Tune with Revisions

• Your initial log becomes the baseline.

• Calibration adjustments are made.

• A revised map is sent.

• You re-log and repeat until optimization is complete.

Custom tuning is an iterative process built from your vehicle’s real-world data.

Check Your Email First

You should have received detailed setup and logging instructions from:

tuningsupport@camtuningperformance.com

Those instructions include:

• Installation steps

• Required logging parameters

• Log submission instructions

• Revision expectations (if applicable)

If you do not see that email, check spam or promotions.

Important

All communication and file delivery is handled through email for proper tracking and version control.

Do not send logs through social media or forum messages.

Need Assistance?

If you cannot locate your instructions or have a question about your setup, email:

tuningsupport@camtuningperformance.com

Include:

• Full name

• Vehicle year and trim

• Order number (if available)